Another significant factor that cannot be overlooked when choosing the waterfall or fountain accessory for the pond includes the pond pump’s proper functioning, the energy efficiency of your water feature, and the pond appearance you choose. In doing so, it has to ensure that the water flow is sufficient but at the same time, it is responsible for that is why there is a guide that will help you to choose the most appropriate pond pump for waterfalls and fountains.
1. Consider the Water Flow Rate
The flow rate is defined as the amount of water pumped into the pond in a given unit of time. Flow rate is measured in gallons per hour this will indicate how much water the pump can move in one hour. This is applicable where the cascades of waterfalls or the brunt of fountains are generated by the pump; they must harmonize.
Waterfalls: For a small waterfall or stream, it will be optimal to use a pump with a flow rate of about 1,000 – 2,000 GPH. If what is needed are larger waterfalls or a stronger impact, then it is recommended to go for pumps with rates at least of 3,000 GPH.
Fountains: Under normal circumstances, the recommended flow rate for fountains is between 300 and 1,500 gallons per hour depending on the size of the fountain, and the height of the water jet desired.
2. Submersible vs External Pumps
Both have their own merits and the case of ponds with waterfalls and fountains, submersible pumps are very popular mostly because of installation and maintenance issues.
Submersible Pumps: These are installed right in the pond and are suitable for small tanks only. They are usually less costly, small in size, and less abrasive than external pumps.
External Pumps: These pumps are outside the pond and they are suitable for large ponds or high-flow ponds. They are generally more strong and lengthy than other tanks but need extra pipes to connect before use.
3. Energy Efficiency
Just imagine when you use a pump that is meant to run round the clock; the electric expense will be high; Energy Conservation is therefore vital. Choose pumps with ‘energy-efficient,’ or lower wattage written on them. Solar-operated pumps may also be desirable for less enormous fountains and falls especially where an environmentally friendly way of operation is desirable.
4. Durability and Reliability
Pond pumps are immersed in water and the best one should be able to work for long durations which is why it is important to be keen on the kind of pond pump that you settle for. Ensure the pumps are manufactured from corrosion-prone material such as stainless steel or good plastic. There are many brand available which are known for their quality and some of those brands are Laguna, TetraPond, Aquascape, Little Giant.
Conclusion
Considerations in choosing the best pond pump for your waterfall or fountain include pond size, type of water feature as well as your pocket. Finally, ensure that you select a pump, your choice submersible or external, that will deliver reasonable flow rates and go for energy-saving and highly reliable units. Your waterfall and fountain can give out beauty and serenity to your pond for as long as the pump is properly chosen.
Leave a Reply
You must be logged in to post a comment.